Hikvision 32CH 1.5U 16 PoE 8K NVR (DS-7732NI-M4/16P)

Video and Audio

IP Video Input

32-ch

Up to 32 MP resolution

*: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs.

Incoming Bandwidth: 320 Mbps

Outgoing Bandwidth: 400 Mbps

HDMI 1 Output8K (7680 × 4320)/30Hz, 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz

HDMI 2 Output

4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz

*: When HDMI 1 output resolution is 8K, the maximum HDMI 2 output resolution is 1080p.

VGA Output1920 × 1080/60Hz

Video Output Mode: HDMI1/VGA simultaneous output, HDMI2/VGA independent output

CVBS Output: 1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480

Audio Output: 1-ch, RCA (Linear, 1 KΩ)

Two-Way Audio: 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)

 

Decoding

Decoding Format: H.265+/H.265/H.264+/H.264

Recording Resolution

32 MP/24 MP/12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA /4CIF/DCIF/ 2CIF/CIF/QCIF

*: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs.

Synchronous Playback: 16-ch

Decoding Capability: 2-ch@32 MP (30 fps)+2-ch@8MP（30fps）/10-ch@8 MP (30 fps)/20-ch@4 MP (30 fps)/40-ch@1080p (30 fps)

Dual-Stream Recording: Support

Stream Type: Video, Video & Audio

Audio Compression: G.711ulaw/G.711alaw/G.722/G.726/AAC/MP2L2

 

Network

Remote Connection: 128

Network Protocol: TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS, ONVIF(Version 2.2), OTAP

Network Interface: 1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface

Camera Access Protocol: ONVIF(Version 2.5), RTSP

 

PoE

Interface: 16, RJ-45 10/100 Mbps self-adaptive Ethernet interface

Power: ≤ 200 W

Standard: IEEE 802.3 af/at

 

RAID

RAID Type: N/A

 

Auxiliary Interface

eSATA: 1 eSATA interface

SATA: 4 SATA interfaces

Capacity: Up to 16 TB capacity for each disk

Serial Interface: 2 RS-485 (half-duplex), 1 RS-232

Alarm In/Out: 16/9

USB Interface: Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0

Ctrl 12V

Controllable 12 VDC, 1 A power output for external alarm device; The power will be turned on when the alarm output is triggered.

*: The Ctrl 12V power is controlled by alarm output 9.

DC 12V12 VDC, 1 A power output

 

General

Power Supply: 100 to 240 VAC, 50 to 60 Hz

Consumption: ≤ 15 W (without HDD and PoE off)

Working Temperature: -10 °C to 55 °C (14 °F to 131 °F)

Working Humidity: 10% to 90%

Chassis: 19-inch rack-mounted 1.5U chassis

Dimension (W × D × H): 445 × 400 × 75 mm ( 17.5″× 15.7″ × 3.0″)

≤ 5 kg (without HDD, 11 lb.)

 

Certification

FCC: Part 15 Subpart B, ANSI C63.4-2014

CE

EN 55032:2015+A1:2020, ENIEC61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:201

9, EN 50130-4:2011+A1:2014, EN 55035:2017+A11:2020